Toll Free: 844-409-1135

SwingSnap Banner-Stretch™ Snap Frames | Large Format

Browse All Products

SwingSnap Tension 4' x 4' Banner Stretching Grip Snap Frame | Large Format 48 x 48

From $654.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 4’x 4’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 4' x 4' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 3' x 5' Banner Stretching Grip Snap Frame | Large Format 36 x 60

From $654.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 3’x 5’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 3' x 5' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 8' x 9' Banner Stretching Grip Snap Frame | Large Format 96 x 108

From $1,352.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 8’x 9’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 8' x 9' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 20' Banner Stretching Grip Snap Frame | Large Format 84 x 240

From $2,054.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 20’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 20' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 50' Banner Stretching Grip Snap Frame | Large Format 192 x 600

From $4,617.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 50’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 50' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 16' Banner Stretching Grip Snap Frame | Large Format 192 x 192

From $2,428.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 16’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 16' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 20' x 40' Banner Stretching Grip Snap Frame | Large Format 240 x 480

From $4,362.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 20’x 40’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 20' x 40' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 55' Banner Stretching Grip Snap Frame | Large Format 84 x 660

From $4,339.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 55’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 55' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 55' Banner Stretching Grip Snap Frame | Large Format 120 x 660

From $4,548.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 55’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 55' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 9' Banner Stretching Grip Snap Frame | Large Format 108 x 108

From $1,429.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 9’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 9' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 60' Banner Stretching Grip Snap Frame | Large Format 192 x 720

From $5,312.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 60’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 60' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 30' Banner Stretching Grip Snap Frame | Large Format 120 x 360

From $2,919.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 30’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 30' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 45' Banner Stretching Grip Snap Frame | Large Format 108 x 540

From $3,929.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 45’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 45' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 55' Banner Stretching Grip Snap Frame | Large Format 108 x 660

From $4,478.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 55’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 55' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 40' Banner Stretching Grip Snap Frame | Large Format 192 x 480

From $4,073.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 40’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 40' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 20' Banner Stretching Grip Snap Frame | Large Format 144 x 240

From $2,428.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 20’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 20' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 8' x 25' Banner Stretching Grip Snap Frame | Large Format 96 x 300

From $2,503.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 8’x 25’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 8' x 25' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 60' Banner Stretching Grip Snap Frame | Large Format 144 x 720

From $5,034.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 60’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 60' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 8' x 10' Banner Stretching Grip Snap Frame | Large Format 96 x 120

From $1,429.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 8’x 10’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 8' x 10' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 20' x 30' Banner Stretching Grip Snap Frame | Large Format 240 x 360

From $3,640.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 20’x 30’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 20' x 30' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 45' Banner Stretching Grip Snap Frame | Large Format 84 x 540

From $3,785.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 45’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 45' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 45' Banner Stretching Grip Snap Frame | Large Format 144 x 540

From $4,146.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 45’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 45' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 50' Banner Stretching Grip Snap Frame | Large Format 108 x 600

From $4,131.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 50’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 50' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 35' Banner Stretching Grip Snap Frame | Large Format 192 x 420

From $3,712.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 35’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 35' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 30' Banner Stretching Grip Snap Frame | Large Format 192 x 360

From $3,352.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 30’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 30' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 10' Banner Stretching Grip Snap Frame | Large Format 108 x 120

From $1,507.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 10’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 10' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 8' x 50' Banner Stretching Grip Snap Frame | Large Format 96 x 600

From $4,061.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 8’x 50’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 8' x 50' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 60' Banner Stretching Grip Snap Frame | Large Format 108 x 120

From $4,826.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 60’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 60' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 40' Banner Stretching Grip Snap Frame | Large Format 144 x 480

From $3,785.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 40’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 40' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 16' x 45' Banner Stretching Grip Snap Frame | Large Format 192 x 540

From $4,434.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 16’x 45’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 16' x 45' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 60' Banner Stretching Grip Snap Frame | Large Format 120 x 720

From $4,895.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 60’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 60' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 20' Banner Stretching Grip Snap Frame | Large Format 120 x 240

From $2,278.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 20’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 20' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 30' Banner Stretching Grip Snap Frame | Large Format 108 x 360

From $2,846.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 30’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 30' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 20' Banner Stretching Grip Snap Frame | Large Format 108 x 240

From $2,203.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 20’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 20' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 45' Banner Stretching Grip Snap Frame | Large Format 120 x 540

From $3,999.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 45’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 45' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 20' x 35' Banner Stretching Grip Snap Frame | Large Format 240" x 420"

From $4,001.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 20’x 35’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 20' x 35' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 20' x 25' Banner Stretching Grip Snap Frame | Large Format 240 x 300

From $3,401.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 20’x 25’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 20' x 25' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 35' Banner Stretching Grip Snap Frame | Large Format 120 x 420

From $3,279.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 35’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 35' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 10' Banner Stretching Grip Snap Frame | Large Format 84 x 120

From $1,708.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 10’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 10' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 25' Banner Stretching Grip Snap Frame | Large Format 120 x 300

From $2,652.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 25’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 25' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 55' Banner Stretching Grip Snap Frame | Large Format 144 x 660

From $4,687.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 55’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 55' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 12' Banner Stretching Grip Snap Frame | Large Format 120 x 144

From $1,739.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 12’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 12' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 20' x 20' Banner Stretching Grip Snap Frame | Large Format 240 x 240

From $3,027.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 20’x 20’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 20' x 20' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 35' Banner Stretching Grip Snap Frame | Large Format 144 x 420

From $3,213.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 35’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 35' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 16' Banner Stretching Grip Snap Frame | Large Format 120 x 192

From $1,979.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 16’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 16' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 12' x 50' Banner Stretching Grip Snap Frame | Large Format 144 x 600

From $4,339.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 12’x 50’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 12' x 50' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 7' Banner Stretching Grip Snap Frame | Large Format 84 x 84

From $1,119.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 7’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 7' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 9' x 16' Banner Stretching Grip Snap Frame | Large Format 108 x 192

From $1,904.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 9’x 16’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 9' x 16' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 10' x 50' Banner Stretching Grip Snap Frame | Large Format 120 x 600

From $4,200.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 10’x 50’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 10' x 50' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled

SwingSnap Tension 7' x 35' Banner Stretching Grip Snap Frame | Large Format 84 x 420

From $3,063.00

  • SwingSnap Banner Stretching Snap Frame
  • Display Large 7’x 35’ Banner Size
  • Indoor or Outdoor Wall Mounting on Building Surfaces
  • Snap Frame: All Four Sides Snap Open
  • Snap Frame Profile: 4" Wide
  • High Grade Aluminum Alloy and Stainless Steel
  • Frame Will Not Rust, Drip or Corrode
  • Finishes Available: Black or Silver
  • Banner Hangs Loose in Frame Before Tightening
  • Accepts Banners with Raw Edges
  • Works with Banners That Have Grommets, Pole Sockets, or Hemmed Edges
  • Frame Also Holds Rigid, but Flexible Substrates
  • Substrate include: Corrugated Plastics, Polystyrene, or Sheet Metal Signs
  • Maximum Thickness: 1/16"
  • Interior Frame Clamps Come with Interlocking Teeth
  • Clamps Made with Hardened Aluminum Alloy
  • Adjustable Clamps Grip Banner Tight
  • Easily Add Clamps Anywhere Along the Frame Rail to Perfectly Tighten the Banner.
  • Position and Tighten Clamps by Hand
  • Wrench Required to Further Tighten Clamps and Eliminate Any Waviness
  • Screw 7' x 35' Frames Directly into Walls: Brick or Other Exterior Wall Material
  • Reuse Banner Stretch Frame on Wall: Eliminate Screwing New Wall Holes
  • Requires One or More Installers Depending on Banner Frame Size
  • All Banner-Stretch™ Frames Ship Unassembled